Google Android developers now added a new security feature to protect user data, FRP (Factory Reset Protection) is the new security features of all Android 5.0 (Lolipop) and up version of Android devices. After the hard reset of your Android device, it will ask you to verify the last sync Google Gmail account to access your device home screen once again, to check who performing the factory reset to verify the identity of the real owner of the phone, This is a very good features to protect and avoid misuse of the device during thefts, but same time too many users also got trouble cause of this, When they hard reset there device and forgotten their GMAIL or password. So, here, we help you to FRP Bypass Samsung Galaxy On8 Via Combination file.
The security features have been added to there phone after the Lolipop version has come, now Google updates their security patch version day by day when the new Android version is out then its more difficult to Samsung SM-J810 FRP Bypass. but after the too much process we tested this is the easiest way we found to Bypass FRP Google Account from your device very easily.
Samsung Galaxy On8 Specifications
Samsung Galaxy On8 released in 2019, Its comes with 4GB of RAM and 64GB of ROM storage and its support up to 1TB of external memory support, Samsung On8 comes with IPS LCD 6.0inch and the screen resolutions 720 x 1480pixels. This device is powered by Quad-core 1.8 GHz Qualcomm MSM8917 Snapdragon 450, and 3500mah battery removable battery and this device come 16mp of front and 16mp of the back camera, make sure both cameras are single.
WE ARE NOT RESPONSIBLE IF YOU’RE TRYING TO BYPASS FRP ON STOLEN PHONE
How to disable FRP (factory reset protection) from Settings:
If you want to disable FRP from Samsung Galaxy On8 device, first of all, go to settings of your device, then remove the sync Google mail account from the Settings -> Accounts & Sync, FRP features will automatically enable when you added Google Gmail account your device and its will auto-synced when you connected your device to an internet connection.
Odin tool:- Download Odin Tool for Samsung Devices
Download Samsung Galaxy On8 Combination File:-
Download Samsung Galaxy On8 Stock Firmware File:-
Now Started to FRP Bypass Samsung Galaxy On8
-First of all, you need to put your device into the Download Mode,
-Then you can flash the Combination file on your device using Odin tool,
How To put Samsung Galaxy On8 into the download mode:
-Power off your Samsung Galaxy On8 first,
-After that, press and hold the (Volume UP and Power Key) Same time, until you see your device logo or (Android logo).
-Then wait a few seconds to boot your device into the recovery mode.
-Now select from there “Reboot to Bootloader” by using volume up and down key,
-Then confirm the “Reboot to Bootloader” by pressing the “Power key” once.
-Now connect your device to the computer to successfully Bypass Samsung SM-J810 FRP.
Now install the Samsung USB Driver
-Download the Samsung Mobile USB driver from the download section.
-Then extract the Samsung USB Driver using WinRAR or 7zip.
-Once extracted then open the extracted folder there you will see the “Setup” file of Samsung USB driver.
-Now double click to run the “Setup” file then install the Samsung USB driver completely.
-Now connect your device to PC using a USB cable.
-Then flash the Combination file to FRP Bypass Samsung Galaxy On8.
Now Flash Combination File
-Download the Odin tool to your PC,
-Then extract the Odin tool to your desktop and then open the extracted folder.
-After that, Run the Odin tool from there.
-Ok Now extract the downloaded combination file.
-Then click on the “AP” and then give the file path of the “extracted Combination file”.
-Ok Now check on the “Odin tool log box” you will see “ADDED” message there.
-Now click on the “Start” button from below.
-Now check your device flashing will be started.
-Wait for the finish,
-Once finish then you will get “PASS” message, disconnect your device from PC,
-Then Power on your device.
-Once Power on your device successfully,
-Then swipe your finger up to down to bring the “Notification Bar”.
-After that, click on the “Settings” icon.
-Then go down and select “System” then -> “Developer Option”
-Now enable the “USB Debugging” mode there.
-After that, enable “OEM Unlock” also there.
-Now go back to the settings and Power off your device to Bypass Samsung SM-J810 FRP.
Note:- If you can’t find the “OEM Unlock” option then follow this method.
-Go to the settings.
-Tap on the “Security & Location”.
-After that, tap on the “Screen Lock”
-Then select Pattern lock from there.
-Draw any Pattern lock and then Confirm the Pattern lock from there.
-Then tap on the “Done” button.
-Now Power Off your device,
Now Flash Stock ROM to Samsung SM-J810 FRP
-Download the Stock firmware to your PC.
-Then extract the “Stock Firmware”.
-Open the Odin tool once again,
-Then Follow this process here to Bypass FRP from your device successfully.-
Once you flash all the files successfully, then power on your device, then set up your device,
-Now check you have successfully FRP Bypass Samsung Galaxy On8(Samsung SM-J810 FRP) from your device.